Painting palette
Category: News
Models ownership info
Hello Friends, Shuriken guy is here!
Thanks for the opportunity to post in this thread.
I’m gonna start from far.
We continue developing the Shuriken Tribe project. The project where you can own a particular model and get money from every sell of it.
Today this sell has happened for the Tulip 5p long Venom. Below I will share some calculations and conclusions. You all are welcome to the discussion.
Long story short: there is a model owned by a person. To became the owner a person has to post the model on their socials with a @shurikencues tag or #shurikentribe hashtag. Thats it, posting claims you as the owner who gets 10% from every sell of this model. Your balance is shown on the listing on shurikencues.com
We had to add value for the Tribe models, so the cost has been adjusted. Still the owner has a privilege which is a special price for buying the model beside 10% from every sell.
Here is this model: Tulip 5p long plaited made in Venom colour palette
Now we may add a bottom set of splices to this Tulip 5p long which appear to be a new model:
Tulip 5p specular flipped long top short bottom made with the same Venom colour palette
The model is unique, it has no owner yet. Here in this thread you see it for the first time.
Order the blank, post it to your socials with @shurikencues tag to claim yourself as an owner.
$700 is the cost of a butt blank + delivery. $70 from every sell is yours.
Double splice = double cost. Blanks with 1 set of splices go by twice lower price.
Proper finishing may add more value to the model.
I encourage you to dig into fullsplice designs, get involved, become an owner, promote your models and benefit from it.
So here is a Tulip 3p specular long top short bottom in a black/green/yellow/red colour palette. It looks similar to the model from the starting post.
Colour pallete is more advanced form of ownership.
You can own this palette which no one else will be able to order it in any splices geometry.
And the number of variations of unique models created using the same splices geometry and the same colour palette is close to infinite. A suggest to consider it as the next level of branding for fullsplice pool cues.
Same ownership principle may be applied to splices geometry. Only you can own it and no one else will be able to order it in any colour palette.
I’m seeking here for a Person or a Company to cooperate and create some good story profitable for everyone.
More detailed information will be posted soon. Feel free to share your any toughts about the topic: shurikencues@gmail.com
This is the perfect example of the “Shuriken Tribe” project.
Model: Venom Tulip 5p long
Owner: Jimmy James McNally
Jimmy has bought a cue blank, finished it, posted it on FB with Shuriken cues tagged – now he is a Model Owner and he will get 10% from every sale of this particular model called Venom Tulip 5p long. From both finished and cue blank selling: $28 or $48 (minus bank taxes) from 1 sale.
You will be notified once the model is sold. You can get the money in cash or keep them until there is enough to request a new model. Then repeat the cycle and get more $$$$ from your models.
Actually we have 1 such a cue blank in stock at the moment 😉
Buy Venom Tulip 5p long plaited
Also this design haven’t been created by Jimmy. This design is super old and extremely unique.
So I encourage everyone who has our cues to do the same and claim your rights by posting your cues with Shuriken Cues tagged. Facebook, Instagram
SHURIKEN TRIBE, CLAIM YOUR DESIGN!
Autumn spot lottery for a finished cue! 19 spots, $34 per spot.
Email shurikencues@gmail.com to get instructions how to participate.
or just comment below this post.
This beauty is going to the winner of the previous spot lottery. Congratulations to James 🥳
He have got multiple spots and 2 of his requested numbers are won.
#6 – the cue.
#15 – a free spot on the next lottery.
#7 – a free spot on the next lottery for Pam.
Autumn lottery is starting right now!
I like the system – we play not the particular cue, but you choose a model from what we have in stock ($$$ equivalent), than we finish it with your custom parameters.
There are several models in stock: blanks and finished cues.
More to come Autumn/Winter.
🦋 Butterfly Effect cues are available plentifully. $100 shipped is the cost to participate.
Those who have waited for years – the time has come! Your cues are complete and ready to go. Your patience and support are highly appreciated! Thank you.
To participate the lottery you need to pay $34, choose a number from 1 to 19 and let me know your name for the list.
No extra payments needed. Free shipping worldwide.
The lottery will start only when we fill all 19 spots.
Feel free to buy multiple spots. Share this lottery to speed up.
- James McNally
- Pam McNally
Parameters of the cue are custom.
Our standard pool cue parameters:
Length: 152.5cm (30/30 inch)
Weight: 538g (19oz)
Joint diameter: 21.4mm
Tip diameter: 11-12.5mm, ferrule
Butt diameter: 30mm
Joint pin: Radial
Pro tapered shaft
Info about the nearest In Stock party!
Hello Friends!
We are starting to collect designs for the next in stock party.
There are literally an infinite amount of combinations, no repeats. During nearest weeks we will choose a couple dozens designs for cue butt blank processing.
Here is your opportunity to participate in the project without any investments:
Just subscribe to this thread on AZB and share your colour\splice design ideas, collect likes, feedbacks, request corrections, post as new design, etc. All here in this thread.
After getting the design – post it on your socials and that’s how you become the Mockup Owner. 5% from every sell is yours.
Buy your model physically, post it in your socials and become the model owner. 10% from every sell is yours.
It is also actual for those who already own any of our cues. Post it on your socials and see yourself as the model owner on our Shuriken Tribe project. Get 10% from every sell both blanks and finished cues.
Prices, available geometry and wood you can see below. Feel free to combine them as you prefer.
Double splice on a single butt = double cost.
Prices shown for Hornbeam wood. Bocote, Cocobolo, any other exotic = extra cost.
It is possible to produce spliced shaft blanks as well.
Blacktulip finished cue with a black shaft 19 spots lottery. $34 per spot
Cue winner #6
Free spot #7
Free spot #15
Today is the Day! Watch live stream for a custom fullsplice cue raffle on Youtube:
https://www.youtube.com/@shurikencues
14:00 UTC 0
10 AM Eastern
5 PM Ukraine
GREAT NEWS EVERYONE! We have filled all 19 spots. The Raffle is about to start. I’ll make an announcement.
Thank you all and GOOD LUCK!
Email here to get instructions how to participate: shurikencues@gmail.com
or just comment below this post.
To participate the lottery you need to pay $34, choose a number from 1 to 19 and let me know your name for the list.
No extra payments needed. Free shipping worldwide.
The lottery will start only when we fill all 19 spots.
Feel free to buy multiple spots. Share this lottery to speed up. One free spot for a person with the biggest reactions amount on the lottery announce repost. We’ll define the winner when 3 empty spots left.
- Mark Matthews
- Stephen M Kastronis
- Pam McNally
- James McNally
- Stephen M Kastronis
- James McNally
- Pam McNally
- James McNally
- Drew Rowan
- James McNally
- Kristen Daniels
- Mark Matthews
- James McNally
- Stephen M Kastronis
- James McNally
- Stephen M Kastronis
- Stephen M Kastronis
- Stephen M Kastronis
- Stephen M Kastronis
Parameters of the cue is custom.
Our standard pool cue parameters:
Length: 152.5cm (30/30 inch)
Weight: 538g (19oz)
Joint diameter: 21.4mm
Tip diameter: 11-12.5mm, ferrule
Butt diameter: 30mm
Joint pin: Radial
Pro tapered shaft
Blacktulip cue butt blank 19 spots lottery. $18 per spot
Email here to get instructions how to participate: shurikencues@gmail.com
or just comment below this post.
To participate the lottery you need to pay $18, choose a number from 1 to 19 and let me know your name for the list.
No extra payments needed. Free shipping worldwide.
The lottery will start only when we fill all 19 spots.
Feel free to buy multiple spots. Share this lottery to speed up. One free spot for a person with the biggest reactions amount on the lottery announce repost. We’ll define the winner when 3 empty spots left.
- Drew Rowan
Cue blank parameters:
Length: 80cm (31 inch)
Butt diameter: 33mm (1.3 inch)
Joint diameter: 24mm (~1 inch)
Classic 9p fullsplice pool cue blanks made of Hornbeam brown, black, white
Where we are going you will like it. US Air forces tribute custom fullsplice pool cue
Model: US Air Force Tribute billiards pool cue Shuriken Split 3x
Owner: Rusty Jones
Rusty has requested a pool cue butt with a special design tributed to the US Air Forces. When he’s got the cue, he posted it on FB with Shuriken cues tagged – now he is a Model Owner and he will get 10% from every sale of this particular model called US Air Force Tribute billiards pool cue Shuriken Split 3x. From both finished and cue blank selling: $62 or $82 (minus bank taxes) from 1 sale.
You will be notified once the model is sold. You can get the money in cash or keep them until there is enough to request a new model. Then repeat the cycle and get more $$$$ from your models.
SHURIKEN TRIBE, CLAIM YOUR DESIGN!
